Asus Z9PE-D8 WS Manual page 143

Using the Objects command
To check data consistency using the Objects command
From the Management Menu, select Objects, and then select Virtual Drive
1.
from the sub-menu.
2. Use the arrow keys to select the virtual drive you want to check, and then
press <Enter>.
Select Check Consistency from the pop-up menu, and then press <Enter>.
3.
When prompted, use the arrow keys to select Yes from the dialog box to
4.
check the drive.
5. When checking is complete, press any key to continue.
ASUS Z9PE-D8 WS 5-21