Sharp MX-B401 Operation Manual page 167

4
Up to 999 copies (sets) can be set.
If an incorrect number of copies is set...
Press the [CLEAR] key (
Press the [START] key.
One set of copies is printed.
If you are using the document glass to copy multiple originals, change originals and press the [START] key. Repeat until all
5
pages have been scanned and then touch the [Read-End] key. One set of copies will be printed.
To cancel copying...
Press the [STOP] key (
Press [End] to continue.
To make a proof copy again, press
[Start].
6
To cancel copying...
Press the [STOP] key (
7
Special Modes
2-Sided Copy
Plain
8½ 11
) and then enter the correct number.
).
Change End
).
Set the number of copies (number of
sets) with the numeric keys.
If you will copy multiple originals using the document glass,
switch to sort mode after this step.
☞
Sort mode (page 2-33)
Check the printed set of copies. If the
copies are acceptable, touch the [End]
key. If you need to change the settings,
touch the [Change] key.
When the [End] key is touched, the remaining sets are printed.
If you touched the [Change] key, go to the next step.
2-83
COPIER
Contents