Cleaning The Bypass Tray Rollers - Sharp MX-B401 Operation Manual

REPLACING SUPPLIES AND MAINTENANCE

Cleaning the bypass tray rollers

If you find that paper fed from the bypass tray misfeeds or is soiled by the roller,
remove and clean the roller. If misfeeds or soiling continue to occur, replace the
roller.
Before starting, remove the paper from the bypass tray.
Press the [POWER] key (
to turn off the panel power, and then switch the
main power switch to the off position.
1
Remove the roller cover from the bypass tray.
Place your fingers behind the
toward you.
2
38
marks on the roller cover and pull straight
Marks
) on the operation panel