Using The Standard Windows Ps Printer Driver (Windows 98/Me/Nt 4.0) - Sharp MX-B401 Operation Manual

USING THE STANDARD WINDOWS PS
PRINTER DRIVER (Windows 98/Me/NT 4.0)
If you wish to use the standard Windows 98/Me/NT 4.0 PS printer driver, follow
the steps below to install the PPD driver using the Add Printer Wizard.
• The CD-ROM does not include software for Windows 98/Me/NT 4.0.
Contact your dealer or nearest SHARP Service Department if you want
software for Windows 98/Me/NT 4.0.
• If you are using Windows 2000/XP/Server 2003/Vista/Server 2008, you can
install the PPD driver from the installer.
• Be sure to view the Readme file (Readme.txt) before installing the PPD driver.
The Readme file will be in the [EnglishA] folder inside the folder that contains
the extracted files after you get the software.
1
Download the software and save the extracted files in any folder.
2
Click the [Start] button, select [Settings] and then click [Printers].
3
Double-click the [Add printer] icon.
The "Add Printer Wizard" will appear.
4
Follow the on-screen instructions.
When you are asked to specify the path of the PPD file, enter the path as follows.
Operating system
Windows 98/Me
Windows NT 4.0
After installation, see "CONFIGURING THE PRINTER DRIVER FOR THE
OPTIONS INSTALLED ON THE MACHINE" (page 37) to configure the printer
driver settings.
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
PPD file path
(Folder containing extracted
files)\EnglishA\PPD\9XME
(Folder containing extracted
files)\EnglishA\PPD\NT40
35