Removing The Swivel Stand; Attaching The Swivel Stand - Sharp DT300 Operation Manual

Setup
Removing the Swivel
Stand
1
Lift the projector (2) with press-
ing the removing-stand button
on the back of the projector (1).
Attaching the Swivel
Stand
1
Align the tabs on the front bot-
tom of the projector (1).
2
While holding down the button
(2), place the projector onto the
Swivel Stand (3) to attach.
3
Press the projector down
firmly to attach it to the Swivel
Stand to make sure it is se-
curely attached to the Swivel
Stand.
-24
DT-300_E_p13_28.p65 Page 24
2
1
Removing-
stand button
3
1
2
03.10.29, 2:40 PM Adobe PageMaker 6.5J/PPC