Setup; Using The Swivel Stand - Sharp DT300 Operation Manual

Setup

Using the Swivel Stand

You can adjust the angle and direction of the
projected image by using the Swivel Stand.
1
Unlock the lever on the Swivel
Stand.
2
Adjust the angle and direction
of the projected image as you
want by lifting up the projec-
tor and rotating the projector
on the Swivel Stand.
Caution
• Do not hold the lens when lifting, lower-
ing or rotating the projector.
• When lowering the projector, be careful not
to get your fingers caught in the area be-
tween the Swivel Stand and the projector.
Note
• When the height or direction of the pro-
jector is adjusted, the image may become
distorted (keystoned), depending on the
relative positions of the projector and the
screen. See page 33 for details on the
keystone correction.
3
Lock the lever on the Swivel
Stand.
DT-300_E_p13_28.p65 Page 23
1
2
3
03.10.29, 2:40 PM
Swivel Stand
LOCK/UNLOCK
lever
Adjustable up to
±10° from the
standard position.
Adjustable up to
±25° from the
standard position.
Adjustable up to
±3° from the
standard position.
-23
Adobe PageMaker 6.5J/PPC