Table of Contents
Advertisement
Picture Setting Func-
tion
This function stores all items set in "Picture".
Five settings can be stored separately in
"Memory 1" to "Memory 5". Each stored set-
ting is reassigned to each input mode (INPUT
1 to INPUT 4 and DIGITAL).
Even when the input mode or signal is
changed, you can easily select optimal set-
tings from the stored settings.
I Storing the Adjustment Val-
ues for Each Memory Num-
ber
Select "Picture Setting" on the "Pic-
ture" menu and the memory location
where you want to store the settings.
Then adjust the setting items on the
"Picture" menu.
➝For operating the menu screen, see
pages 38 to 41.
Selected Item
Memory
Settings of all items in "Picture" can be
1-5
stored for the respective input modes.
The stored settings can be selected in
any input modes.
Memory
Besides "Memory 1" to "Memory 5",
OFF
other settings on the "Picture" menu
can be stored for each input mode.
The settings stored in "Memory OFF"
cannot be applied when another input
mode is selected.
I Applying the Stored Settings
If you want to apply the stored settings
on the "Picture" menu, select "Picture
Setting" on the "Picture" menu and the
memory location where you have
stored the settings.
Note
• This function can be operated using the
on the projector or
control, as well as the OSD menu screen.
Each time
or
memory number changes as shown be-
low.
Memory 1
Memory 2
Memory OFF
Memory 5
DT-300_E_p44_50.p65
Description
on the remote
is pressed, the
Memory 3
Memory 4
Page 47
On-screen Display
PICTURE SETTING button
PICTURE SETTING
button
03.10.29, 2:44 PM
Adobe PageMaker 6.5J/PPC
-47
Advertisement
Table of Contents
