Setup; Using The Swivel Stand; Removing The Swivel Stand - Sharp XV-Z201E Operation Manual

Setup

Using the Swivel Stand

You can adjust the angle and direction of the
projected image by using the Swivel Stand.
1
Unlock the lever on the Swivel
Stand.
2
Adjust the angle and direction
of the projected image as you
want by lifting up the projec-
tor and rotating the projector
on the Swivel Stand.
Caution
• Do not hold the lens when lifting, lower-
ing or rotating the projector.
• When lowering the projector, be careful not
to get your fingers caught in the area be-
tween the Swivel Stand and the projector.
Note
• When the height or direction of the pro-
jector is adjusted, the image may become
distorted (keystoned), depending on the
relative positions of the projector and the
screen. See page 33 for details on the
keystone correction.
3
Lock the lever on the Swivel
Stand.
Removing the Swivel
Stand
1
Lift the projector (2) with
pressing the removing-stand
button on the back of the pro-
jector (1).
-24 -24
1
2
3
2
Swivel Stand
LOCK/UNLOCK
lever
Adjustable up to
±10° from the
standard position.
Adjustable up to
±25° from the
standard position.
Adjustable up to
±3° from the
standard position.
1
Removing-
stand button