Keystone Correction - Sharp DT300 Operation Manual

Keystone Correction

This function can be used to adjust the Key-
stone settings.
Note
• For details about using the menu screen,
see pages 38 to 41.
1
Press on the projector or
on the remote control.
2
Press /
stone" or "V Keystone".
Selected Item
H Keystone
V Keystone
Reset
3
Press / to move the mark
on the selected adjustment
item to the desired setting.
Note
• Straight lines and the edges of the
displayed image may appear
jagged, when adjusting the Key-
stone setting.
• When adjusting "H Keystone" and
"V Keystone" at the same time, the
values of adjustable angles for each
setting become smaller.
• The adjustable value of the "V Key-
stone" becomes extremely small
when "H Keystone" is made to be
the maximum value.
• Keystone correction is disabled
while the picture mode is set to
"SMART STRETCH". (See page
35.)
4
To return to the normal screen,
press again.
DT-300_E_p29_43.p65
to select "H Key-
Description
Horizontally adjusts the
keystone settings.
Vertically adjusts the
keystone settings.
V and H Keystone
adjustments are returned to
the factory preset settings.
Page 33
KEYSTONE button
KEYSTONE button
Horizontal Keystone Correction
Vertical Keystone Correction
03.10.29, 2:42 PM
", ',\, |
buttons
", ',\, |
buttons
-33
Adobe PageMaker 6.5J/PPC