Sharp DT300 Operation Manual page 28

Upper and Lower Lens Shift Position
• This projector is equipped with a lens shift function that lets you adjust the projection height.
• Adjust the projection height to match the setup configuration.
• The screen can be moved maximum the length of one screen vertically using the lens shift.
Note
• Optimal image quality is produced with the projector positioned perpendicular to the screen with all feet flat and level.
Tilting or angling the projector will reduce the effectiveness of the lens shift function.
Screen size: 100 inches (254 cm)
Aspect ratio: 16:9
Screen
90°
90°
Lower edge of screen (White portion) =
Standard (0) point
Upper and Lower Lens Shift Position (Ceiling Mount)
When the projector is in the inverted position, use the upper edge of the screen as the base line,
and exchange the lower and upper lens shift values.
Screen size: 100 inches (254 cm)
Aspect ratio: 16:9
Screen
90°
90°
DT-300_E_p13_28.p65
Lens center
Lens center
Page 27
Lower lens shift position
(High mount setup)
Upper lens shift position
(Desktop setup)
03.10.29, 2:40 PM Adobe PageMaker 6.5J/PPC
-27