Vivax ACP-12CH35AEHI+ R32 User Manual page 222

VIVAX
Outdoor Unit Installation
Install the unit by following local codes
and regulations , there may be differ
slightly between different regions.
Installation Instructions –
Outdoor unit
Step 1: Select installation location
Before installing the outdoor unit, you
must choose an appropriate location.
The following are standards that will help
you choose an appropriate location for
the unit.
Proper installation locations meet the
following standards:
 Meets all spatial requirements
shown in Installation Space
Requirements above.
 Good air circulation and
ventilation
 Firm and solid—the location can
support the unit and will not
vibrate
 Noise from the unit will not disturb
others
 Protected from prolonged periods
of direct sunlight or rain

Where snowfall is anticipated,
take appropriate measures to
prevent ice buildup and coil
damage.
DO NOT install unit in the following
locations:

Near an obstacle that will block air
inlets and outlets

Near a public street, crowded
areas, or where noise from the unit
will disturb others Near animals or
plants that will be harmed by hot air
discharge

Near any source of combustible
gas

In a location that is exposed to
large amounts of dust

In a location exposed to a
excessive amounts of salty air
SPECIAL CONSIDERATIONS FOR
EXTREME WEATHER
If the unit is exposed to heavy wind:
Install unit so that air outlet fan is at a
90° angle to the direction of the wind. If
needed, build a barrier in front of the unit
to protect it from extremely heavy winds.
See Figures below.
Strong wind
If the unit is frequently exposed to
heavy rain or snow:
Build a shelter above the unit to protect
it from the rain or snow. Be careful not
to obstruct air flow around the unit.
If the unit is frequently exposed to
salty air (seaside):
Use outdoor unit that is specially
designed to resist corrosion.
18
ENG
Strong wind
Wind Baffle
Strong wind