Vivax ACP-12CH35AEHI+ R32 User Manual page 220

VIVAX
Indoor Unit Installation
Installation Instructions – Indoor unit
PRIOR TO INSTALLATION
Before installing the indoor unit, refer to
the label on the product box to make sure
that the model number of the indoor unit
matches the model number of the outdoor
unit.
Step 1: Select installation location
Before installing the indoor unit, you must
choose an appropriate location. The
following are standards that will help you
choose an appropriate location for the
unit.
Proper installation locations meet the
following standards:
 Good air circulation
 Convenient drainage
 Noise from the unit will not
disturb other people
 Firm and solid—the location will
not vibrate
 Strong enough to support the
weight of the unit
 A location at least one meter
from all other electrical devices
(e.g., TV, radio, computer)
DO NOT install unit in the following
locations:

Near any source of heat,
steam, or combustible gas

Near flammable items such as
curtains or clothing

Near any obstacle that might
block air circulation

Near the doorway

In a location subject to direct
sunlight
NOTE ABOUT WALL HOLE:
If the wall is made of brick, concrete, or
similar material, drill 5mm-diameter
(0.2in-diameter) holes in the wall and
insert the sleeve anchors provided. Then
secure the mounting plate to the wall by
tightening the screws directly into the clip
anchors.
16
ENG