Table of Contents
Advertisement
When not in use the appliance must be disconnected from the mains power supply. It is recommended to remove
the power cable for additional safety, especially in the presence of children.
The service fuse may have to be replaced if the control panel display does not switch on.
There is a fusebox on the back of the product, near the power socket.
After removing the plugs from the power socket, open the fusebox cover with a screwdriver and replace the fuses if necessary (3.15
A delayed) - seek assistance from an authorised and qualified technician.
13.12 CHECKING THE INNER COMPONENTS
ATTENTION!
The internal electromechanical components must only be checked by qualified personnel
whose technical expertise includes combustion and electricity.
We recommend for this yearly maintenance to be carried out (with a scheduled service contract). This operation consists of a visual
and functional inspection of the internal components. A summary of the checks and/or maintenance operations that are essential
for the correct operation of the product is provided below.
USER/TECHNICIAN
UNDER THE USER'S RESPONSIBILITY
BY THE QUALIFIED TECHNICIAN
** Emptying of the ash compartment depends on various factors (pellet type, stove power, stove use, type of installation...); the
exact emptying time will be suggested by experience.
14
IN CASE OF ANOMALY
14.1 PROBLEM SOLVING
Before of every Authorized Technician intervention, the same Technician has the duty to check if the parame-
ters of the mother board correspond to those of the table you own.
In case of doubts regarding the use of the stove, please contact ALWAYS the Authorized Technician on order to
avoi irreparable damages!
29
Stufe a pellet
PARTS/FREQUENCY
Brazier
Ash compartment **
Glass
Upper exchanger
Lower exchanger
Smoke duct
Gaskets
Door closure operation
1 DAY
2-3 DAYS
X
X
7 DAYS
1 YEAR
X
X
X
X
X
X
Advertisement
Table of Contents
