Pellet Refuelling Timer; Ventilation; Remote Control (Optional) - Cadel Cristal 7 Up User Manual

Hide thumbs Also See for Cristal 7 Up:
Table of Contents

Advertisement

9.3

PELLET REFUELLING TIMER

This stove is equipped with a safety timer that activates after the pellet hopper door has been open for 90 seconds during reloa-
ding (see Fig. 26 and Fig. 28). After 90 seconds, the stove goes into "A05" depression alarm and proceeds to switch off.
Wait until it switches off, then light it again.
Fig. 26 - Door open
To operate correctly, the stove must work with the pellet hopper door always closed; should it remain open for
more than 90 seconds, the stove switches off.
• The loading system stops when the tank door is opened.
Before closing the lid, make sure there are no pellets below the gasket. Pellets deteriorate the gasket and
eliminate its airtight sealing. (vedi Fig. 27)
10

VENTILATION

• The stove is endowed with a ventilation system.
• The air blown from fans keeps the appliance at a low temperature range in order to avoid high stresses to the materials which
make it up.
• Do not cover the hot air outlet slits with any object to avoid stove's overheating!
• The stove is not suitable for food cooking.
11

REMOTE CONTROL (OPTIONAL)

• The stove can be operated through a remote control (optional)
• Operation requires 1 CR 2025 (3Volt) Lithium battery
• Operating temperature 0 °C / 50 °C
• 38 khz infrared signal
23
Stufe a pellet
Fig. 27 - deteriorated gasket
Fig. 29 - Do not cover air slits
Fig. 28 - Timer: 90 seconds

Advertisement

Table of Contents
loading

Table of Contents