Table of Contents
Advertisement
S
UPER P4SCA/P4SCE User's Manual
Keyboard Wake-Up
The JPWAKE jumper is used to al-
low the system to be awakened
by pressing a key on the keyboard
from S1 or S3 in Windows OS.
See the table on the right for
jumper settings. Your power sup-
ply must meet ATX specification
2.01 or higher and supply 720 mA
of standby power to use this fea-
ture.
LAN Enable/Disable
Change the setting of jumper J34,
J35 (*P4SCE only) to enable or dis-
able the onboard LAN on the moth-
erboard. See the table on the right
for jumper settings.
setting is Enabled.
The default
2-14
Keyboard W ake-Up
Jumper Settings
(JPW AKE)
Jumper
Position
Definition
1-2
Disabled
2-3
Enabled
LAN
Enable/Disable
Jumper Settings
(J34, J35)
Jumper
Position
Definition
Pins 1-2
Enabled
Pins 2-3
Disabled
Advertisement
Table of Contents
