4-4.4 Pnp Configuration - Supermicro P4SCE User Manual

Supermicro p4sce motherboards: user guide

Hide thumbs Also See for P4SCE:

Table of Contents

Chapter 4: BIOS

4-4.4

PnP Configuration

Choose PCI/PnP Configurations from the Award BIOS main menu with the

Left/Right arrow keys. You should see the following display:

PnP OS Install

Enter "Yes" if are you are using an OS that is PnP (Plug and Play) -

compatible. Enter "No" if your OS does not support PnP.

Reset Configuration Data

Enabling this setting resets the extended system configuration data when

you exit setup. Do this when you have installed a new add-on and the

system reconfiguration has caused such a serious conflict that the OS

cannot reboot the system. The options are "Enabled" and "Disabled".

Resources Controlled By

This setting allows BIOS to automatically configure all boot and Plug and

Play compatible devices. If you choose Auto, you cannot select the IRQ,

DMA and memory base address fields, because BIOS automatically assigns

them. The options are "Auto <ESCD>" and "Manual".

Onboard LAN Boot (*P4SCA)

Select "Enabled" to enable the Boot ROM embedded in the Onboard LAN

Chip. The options are: "Enabled" and "Disabled".

4-11

Table of Contents

P4sca