Table of Contents
Advertisement
S
UPER P4SCA/4SCE User's Manual
Onboard LAN Boot (*P4SCE)
Select "Enabled" to enable the Boot ROM embedded in the Onboard LAN
Chip. The options are: "Enabled", "LAN 1", "LAN 2", and "Disabled".
4-4.5
Hardware Monitors
There are only three settings on this menu (below). The rest of this menu
shows various temperatures and voltage levels as indicated.
CPU Warning Temperature
This allows you to set the CPU warning temperature. If the CPU temperature
reaches this threshold, an alarm will activate and a warning message will
0
0
0
be displayed onscreen. The options are "Disabled", "60
C/140
F", "65
C/
0
0
0
0
0
0
0
0
0
149
F", "70
C/158
F", "75
C/167
F", "80
C/176
F" and "85
C/185
F".
Note: In the Windows OS environment, the Supero Doctor III settings take
precedence over the BIOS settings. When first installed, the SD III adopts
the temperature threshold settings previously set in the BIOS. Any subse-
quent changes to these thresholds must be made within Supero Doctor,
since the SDIII settings override the BIOS settings. For the Windows OS to
adopt the BIOS temperature threshold settings, please change the SDIII set-
tings to be the same as those set in the BIOS.
4-12
Advertisement
Table of Contents
