Mounting The Motherboard In The Chassis; Installing Ddr Memory - Supermicro P4SCE User Manual

S
UPER P4SCA/P4SCE User's Manual
Lever
Pin 1
Figure 2-1. 478-pin mPGA Socket: Empty and with Processor Installed
2-3

Mounting the Motherboard in the Chassis

All motherboards have standard mounting holes to fit different types of
chassis. Make sure that the locations of all the mounting holes for both the
motherboard and the chassis match. Although a chassis may have both
plastic and metal mounting fasteners, metal ones are highly recommended
because they ground the motherboard to the chassis. Make sure that the
metal standoffs click in or are screwed in tightly. Then, use a screwdriver
to secure the motherboard onto the motherboard tray.
2-4

Installing DDR Memory

Exercise extreme care when installing or removing memory
Memory Module Installation (See Figure 2-2)
1. Insert each DDR memory module vertically into its slot. Pay attention to
the notch along the bottom of the module to prevent inserting the mod-
ule incorrectly.
2. Gently press down on the memory module until it snaps into place.
CAUTION
modules to prevent any possible damage.
(See support information below.)
Pin 1
Processor
2-4
(installed)