Jpeg Was Selected For The File Type But The File Was Created As A Tiff File - Sharp MX-2700N Quick Start Manual

Problem
JPEG was selected for
the file type but the file
was created as a TIFF
file.
The image is too light
or too dark.
(When using PC
Scan.)
20
Point to check
Did you press the [BLACK & WHITE
START] key ( ) to begin scanning?
Is the threshold value suitable?
Are the brightness and contrast settings
suitable?
Solution
When [JPEG] is selected for the file type and the image
is scanned in Mono 2, the file will be created as a TIFF
file. To create the file as a JPEG file, change the color
mode to [Full Color] and then press the [COLOR
START] key ( ).
When scanning from the TWAIN driver with [Mono 2
gradation] selected from the [Color Mode], check the
"B/W Threshold" setting. A large threshold value makes
the image darker and a small threshold value makes the
image brighter. To adjust the "B/W Threshold"
automatically, click the [Auto Threshold] button on the
[Image] tab of the "Custom Settings" window.
When the brightness and contrast settings are not
suitable (for example, the scanned image is too bright),
click the [Auto Brightness / Contrast Adjustment] button
on the [Color] tab of the "Custom Settings" window. You
can also click the [Brightness / Contrast] button to set
the brightness and contrast while viewing the scanned
image.