Sharp MX-2700N Quick Start Manual page 176

(11) Paper misfeed in the saddle stitch
finisher (top)
(12) Paper misfeed in the paper pass unit
(13) Paper misfeed in the large capacity tray
6
Open the top cover and
remove the misfed paper.
Pull out the paper pass unit
and remove the misfed
paper.
Check the paper reversing
section inside the tray and
remove any misfed paper.
*A misfeed has occurred
inside the machine. Look
inside to check.
While holding the tray
release lever, carefully slide
the large capacity tray away
from the main unit until it
stops.
(14) Paper misfeed in the saddle stitch
finisher (bottom)
While pulling the lever, slide
the saddle stitch finisher to
the left until it stops.
Turn knob until a blue
indication is seen.
Open the finisher right cover
and remove the misfed
paper.
Rotate knob and remove the
misfed paper.