Selecting The Resolution And Exposure - Sharp MX-2700N Quick Start Manual

SELECTING THE RESOLUTION AND
EXPOSURE
The resolution and exposure can be selected to match the characteristics of the original, such as text or photo,
the size of the text, and the darkness of the image.
When sending originals with small text or light colors, adjust the resolution and exposure.
Changing the resolution
The following example explains how to set the resolution to [Fine] and [Half Tone] when sending an original with
small text.
The side to be scanned must be face up!
Fax
Auto
Mode Switch
Exposure
Image
Settings
Standard
(1) Resolution
Memory TX
(2)
Direct TX
Auto 8 x11 1 / 2
Special Modes
Original
Auto Reception
Fax Memory:100%
Fax
Resolution
Standard
Fine
(3)
Super Fine
Ultra Fine
1
Place the original.
When using the document glass, place the original
with the side to be scanned face down.
2
Select the resolution in the touch panel.
Address Book
(1) Touch the [Image Settings] key.
Sub Address
(2) Touch the [Resolution] key.
Special Modes
File
Quick File
(3) Touch the [Fine] key.
OK
(5)
(4) Touch the [Half Tone] key.
Half Tone
(4)
(5) Touch the [OK] key.
3
Enter the fax number of the receiving fax
machine and press the [BLACK & WHITE
START] key.
The resolution increases in the following order:
[Standard], [Fine], [Super Fine], [Ultra Fine].
Select [Half Tone] for a photo or illustration with
shading to further improve the image.
[Half Tone] cannot be selected when [Standard]
is selected.
Correct a mistake Cancel scanning
3