Copying On Special Paper (Bypass Copy) - Sharp MX-2700N Quick Start Manual

COPYING ON SPECIAL PAPER (Bypass Copy)

Use the bypass tray to copy on special types of paper such as heavy
paper, envelopes, and tab paper.
This section explains how to load 8-1/2" x 11" heavy paper in the
bypass tray.
The side to be scanned must be face up!
Full Color
Auto Auto
Color Mode
Original
Job Detail
Settings
(1)
Auto
Exposure
100%
Copy Ratio
Paper Select
8 x11 1 / 2
Plain
8 x11R 1 / 2 Plain
8 x14 Plain
1 / 2
11x14 Plain
Copy Mode
Bypass Tray Type/Size Setting
Select the paper type.
Plain Letter Head
Pre-Printed Pre-Punched
Recycled Color
22
The side to be copied on
must be face down!
2-Sided Copy
8 x11 1 / 2
Paper Select
Output
(2)
8 x11 1 / 2
Special Modes
Special Modes
File
Quick File
OK
8 x11 1 / 2
Plain
(3)
Cancel
1/2
Thin Paper Transparency
Heavy Paper Tab Paper
(4)
Labels Envelope
1/2
Original
1
Place the originals.
When using the document glass, place the original
with the side to be scanned face down.
2
Insert paper in the bypass tray.
3
Select paper settings in the touch panel.
(1) Touch the [Job Detail Settings] key.
(2) Touch the [Paper Select] key.
(3) Touch the [Plain] key.
Touch the key of the type of paper that is loaded
in the bypass tray.
(4) Touch the [Heavy Paper] key.
Copy on
heavy paper