Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Remove the
base
cover.
Procedure
1
Disconnect the power-adapter port cable from the system board.
2
Remove the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly.
3
Lift the power-adapter port along with its cable off the palm-rest and keyboard assembly.
Removing the power-adapter port
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
Removing the power-adapter port
26
45
Advertisement
Table of Contents
