WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Remove the
base
cover.
Procedure
1
Peel off the tape that secures the fan cable to the palm-rest and keyboard assembly.
2
Disconnect the fan cable from the system board.
3
Remove the two screws (M2x3) that secure the fan to the palm-rest and keyboard assembly.
4
Lift the fan off the palm-rest and keyboard assembly.
computer. After working inside your computer, follow the instructions in
Removing the fan
After working inside
www.dell.com/
Removing the fan
20
39