Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the screw holes on the battery with the screw holes on the palm-rest and keyboard assembly.
2
Replace the two screws (M2x3) that secure the battery to the palm-rest and keyboard assembly.
3
Connect the battery cable to the system board.
4
Adhere the tape that secures the battery cable to the battery-cable connector.
5
Adhere the tape that secures the battery cable to the battery.
computer. After working inside your computer, follow the instructions in
Replacing the battery
www.dell.com/
Replacing the battery
9
After working inside
21
Advertisement
Table of Contents
