Table of Contents
Advertisement
Figure 34. Installing the battery cable
Steps
1. Connect the battery cable to the connector (BATT1) on the battery.
2. Route the battery cable through the routing guides on the battery.
3. Adhere the tape to secure the battery cable to the battery.
Next steps
1. Install the
3-cell battery
2. Install the
base
cover.
3. Follow the procedure in
Fan
Removing the fan
CAUTION:
The information in this removal section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following image indicates the location of the fan and provides a visual representation of the removal procedure.
or the
4-cell
battery, whichever is applicable.
After working inside your
Before working inside your
computer.
computer.
Removing and installing Field Replaceable Units (FRUs)
67
Advertisement
Table of Contents
