Samsung NX58K9500WG User Manual page 55

Troubleshooting
Warming drawer
Problem Possible cause
Warming The controls are not set
drawer will not properly.
work.
The Self-Clean or Sabbath
function is being used.
The oven controls have been
locked.
There is a blown fuse or
tripped circuit breaker.
Excessive The temperature setting is too
condensation high.
in the warming
The foods being warmed
drawer.
are not covered with a lid or
aluminum foil.
You are trying to warm
liquids.
Warming The drawer is not properly
drawer or aligned with the full-
storage drawer extension roller guide rails or
does not slide nylon drawer guides.
smoothly or
The contents in the drawer
drags.
are too heavy.
Action
Reset the controls as
described on page 42.
The warming drawer will not
operate when either of these
functions is operating. Try
again after these functions
are completed or cancelled.
Unlock the controls and try
again.
Replace blown fuse or reset
tripped circuit breaker.
See page 42.
Cover foods with a lid or
aluminum foil.
Liquid should not be warmed
in the drawer. Remove liquids.
Remove and replace the
drawer. (See page 50.)
Reduce the weight and/or
redistribute the contents in
the drawer.
Others
Problem Possible cause
The product is The appliance has been
not level. installed improperly.
The leveling leg(s) is (are)
damaged or uneven.
The kitchen cabinets are not
properly aligned and make
the range appear to be not
level.
Display goes The electrical outlet Ground
blank. Fault Interrupter (GFI or GFCI)
has been tripped and needs to
be reset.
Your digital control has been
damaged.
Action
Make sure the floor is level,
strong, and stable. If the
floor sags or slopes, contact a
carpenter.
Check and level the range.
(See the Installation
Instructions.)
Ensure that cabinets are
square and provide sufficient
room for installation.
Replace fuse or reset circuit
breaker.
English 55