Samsung NX58K9500WG User Manual page 38

Slide-in gas range
Hide thumbs Also See for NX58K9500WG:
Table of Contents

Advertisement

Available languages

Available languages

Gas oven
Favorite Cook
Create a favorite cooking recipe with 3 different personalized settings. This is
available only with baking, convection baking, or convection roasting.
To set or change a favorite cook mode
1
3
1. Press the button corresponding to a desired cooking mode such as Bake.
2. Keep the default temperature (350 °F) or enter a desired temperature using
the number pad.
3. Press the Cooking Time button.
4. Enter a desired cooking time using the number pad.
5. Press the Options button, and then 1 on the number pad.
6. See the table below, and then press a number on the number pad that
corresponds to the "location" in which you want to store the recipe. You can
select 1, 2, or 3.
1
Recipe 1
7. Press the START/SET button to save the changes.
38 English
2
4
6
7
5
5
2
3
Recipe 2
Recipe 3
To use or recall a favorite cook mode
4
2
1
3
1
Temperature
The oven temperature has been calibrated at the factory. When first using the
oven, follow the recommended recipe times and temperatures. If it appears that
the oven is too hot or too cool, you can recalibrate the oven temperature. Before
recalibrating, test a recipe by using a temperature setting that is higher or lower
than recommended. The baking results should help you decide how much of an
adjustment is needed. The oven temperature can be adjusted by ±35 °F (±19 °C).
3
4
1
1
2
NOTE
This adjustment does not affect the broiling or the self-cleaning temperature, and
is retained in memory after a power failure.
1. Press the Options button and then 1 on
the number pad.
2. Press the number that corresponds to
the desired favorite cooking recipe.
3. Press the START/SET button to start
cooking.
4. When the cooking is complete, press
the OFF/CLEAR button, and take out the
food.
1. Press the Options button and then 2 on
the number pad.
2. Press the Options button to select a
higher (+) or lower (-) temperature.
3. Enter an adjusting temperature value
(0~35) using the number pad.
4. Press the START/SET button to save the
changes.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents