Samsung NX58K9500WG User Manual page 52

Troubleshooting
Oven
Problem Possible cause
The oven You have a function information
control beeps code. See the Information codes
and displays chart on page 56.
an information
code.
Very large or The oven burner air adjustment
yellow oven shutters need to be adjusted.
burner flames.
Gas supply is not properly
connected or turned on.
Wrong orifice is assembled.
Oven Oven thermostat needs
temperature is adjustment.
too hot or cold.
52 English
Action
Press the OFF/CLEAR button and
restart the oven. If the problem
persists, disconnect all power to
the range for at least 30 seconds
and then reconnect the power. If
this does not solve the problem,
call for service.
Call for a qualified service
technician.
See the Installation Instructions
that came with your range.
Check the burner orifice size and
contact your installer if you have
the wrong orifice (LP gas instead
of natural gas or natural gas
instead of LP gas).
See page 38.
Problem Possible cause
Oven burner will The oven door lock is turned on.
not shut off.
The Sabbath function has been
activated.
Action
The display will show the Lock
icon. Hold the oven door open
and press the START/SET button
for 3 seconds. The oven will beep
and the Lock icon will turn off.
SAb and the time of day will
show in the display. All other
controls and signals will be
deactivated. To turn off the
oven only, press the OFF/CLEAR
button. To cancel the Sabbath
function and reactivate the
controls and signals, press and
hold the Bake and Touch to
Wake-Up buttons simultaneously
for 3 seconds.