Samsung NX58K9500WG User Manual page 46

Maintenance
CAUTION
• Do not clean the control knobs in a dish washer.
• Do not spray cleansers directly onto the control panel. Moisture entering the
electric circuits may cause electric shock or product damage.
Cooktop surface
The porcelain-enameled cooktop surface needs to be kept clean. It is advisable to
remove food spills immediately after they took place.
46 English
1. Turn off all surface burners.
2. Wait until all burner grates cool down,
and then remove them.
3. Clean the cooktop surface using a soft
cloth. If food spills run into gaps of the
burner components, remove the burner
cap and the head, and wipe out the
spills.
4. When cleaning is finished, reinsert the
burner components, and put the burner
grates into position.
CAUTION
• Do not use a steel-wool pad or abrasive cleaner, which can scratch or damage
the enamel surface.
• Do not remove the cooktop surface for cleaning purposes. The gas lines
leading to the burner manifolds can be damaged, resulting in a fire or system
failure.
• Do not pour water into the cooktop well while cleaning the cooktop. This could
leak down into the range gas and electrical systems creating a risk of electrical
shock or high levels of Carbon Monoxide, due to corrosion of the gas valves or
ports.
• Keep oven vent ducts unobstructed. Clean vents frequently to avoid grease
buildup. There can be slight popping sound during oven cooking. This sound
may occur during the normal oven burner cycling, when the oven burner flame
is extinguished.
Burner grates and components
Turn off all surface burners, and make sure they are all cooled down.
2
1
3
1. Remove the burner grates.
2. Remove the burner caps from the
burner heads.
3. Remove the burner heads from the
valve manifolds to reveal the starter
electrodes.
4. Clean all removable grates and burner
components in warm, soapy water. Do
not use steel-wool pads or abrasive
cleaners.
5. Rinse and dry grates with burner
components thoroughly.