A+ Server 1122GG-TF User's Manual
Checking the Air Flow
Checking the Air Flow in the Chassis
•
Make sure there are no wires or other objects obstructing the airflow in and
out of the server. Pull all excess cabling out of the airflow path or use shorter
cables.
•
Do not operate the server without drives or drive trays in the drive bays. Use
only recommended server parts.
•
The control panel LEDs inform you of the overall system status. See "Chapter
4 System Interface" for details on the LEDs and the control panel buttons.
6-5
Installing Expansion Cards
The SC118G chassis includes I/O slots for four full-height, full-length expansion
cards, although the 1122GG-TF server supports only two. Alternatively, the server
can be configured for two double-width, high-end graphics processor units (GPUs).
In addition the chassis and serverboard support one low-profile expansion card
Optional Double-Width,
GPU Slot
Figure 6-6. Rear Expansion Slots
One Low-Profile
Expansion Slot
Full-Height, Full-Length
Expansion Slots
6-8
Optional Double-Width,
GPU Slot