Supero 1122GG-TF User Manual page 81

Installing a Hard Drive Carrier Into the Chassis
1. Insert the drive carrier into its bay, keeping the carrier oriented so that the hard
drive is on the top of the carrier and the release button is on the right side.
When the carrier reaches the rear of the bay, the release handle will retract.
2. Push the handle in until it clicks into its locked position.
Note: When installing the hard drive carrier which is next to the power supply,
that the power supply handle must be lifted before extending the hard drive carrier
handle, or inserting the hard drive carrier into the drive bay.
Figure 6-4. Installing/Removing the Carrier Next to the Power Supply
Caution: Except for short periods of time (swapping hard drives), do not operate
the server with the hard drive carriers removed.
Chapter 6: Advanced Chassis Setup
6-5