Supero 1122GG-TF User Manual page 100

A+ Server 1122GG-TF User's Manual
Remap Port Device Number
This setting allows you remap the Port Device number. Options include
Auto and port numbers between 2 and 13.
L1 Immediate ACK
This setting allows you to Enable or Disable L1 ACK. When enabled, the
L1 will be ACK'd immediately.
Lane Reversal
Use this setting to Enable or Disable Lane Reversal.
Hot Plug Support
Use this setting to set Hot Plug Support. Options include Disabled and
Native.
 NB-SB Port Features
NB-SB Link APSM
Use this to set the NB-SB Link ABSM. Options include L1 and Disabled.
Link Width
This setting allows you to set the Link Width for the NB-SB port. Options
include Auto, x1, x2 and x4.
NP NB-SB VC1 Traffic Support
Use this setting to Disable or Enable NP NB-SB VC1 traffic support.
Compliance Mode
Use this setting to Enable or Disable Compliance Mode for the NB-SB port.
 GPP1 ~ GPP3b Core Settings
These submenus allow you to specify GPP core settings. Each submenu
allows you to define the same settings listed below.
Core Configuration
This setting allows you to configure core configuration. Options include
Auto, 1x16 and 2x8.
7-8