ATI Graphics Controller
The H8QMi-2+ features an integrated ATI video controller based on the 16 MB
ES1000 graphics chip. The ES1000 was designed specifi cally for servers, featuring
low power consumption, high reliability and superior longevity.
Other Features
Other onboard features that promote system health include onboard voltage moni-
tors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU
overheat sensors, virus protection and BIOS rescue.
1-3
Server Chassis Features
The 1041M-T2+ is a high-end, scaleable server platform built upon the SC818TQ+-
10000 1U server chassis. The following is a general outline of the main features of
the SC818TQ+-1000LP chassis.
System Power
The SC818TQ+-1000LP features a single, cold-swappable 1000W power supply.
Power must be removed from the system before servicing or replacing the power
supply.
SATA Drives
The SC818TQ+-1000LP chassis was designed to support three SATA hard drives,
which are hot-swappable units. Note: The operating system you use must have
RAID support to enable the hot-swap capability of the SATA drives.
PCI Expansion Slots
One low-profi le size PCI-E add-on card may be used with the CSE-RR1U-E16 riser
card (included). See section 5-6 for details.
Front Control Panel
The SC818TQ+-1000LP's control panel provides you with system monitoring and
control. LEDs indicate system power, HDD activity, network activity (2) and overheat/
fan failure. A main power button and system reset button is also included.
Chapter 1: Introduction
1-3