Supero AS-1041M-T2 Plus User Manual page 71

Chapter 7: BIOS
Thermal Throttling
This setting is used to Enable or Disable Thermal Throttling.
Microcode Update
This setting is used to Enable or Disable microcode updates for Virtual Machine.
SVM uCode Option
This setting is used to Enable or Disable processor-assisted virtualization.
Power Now
This setting is used to Enable or Disable the AMD Power Now feature.
Thermal Throttling
This setting is used to Enable or Disable Thermal Throttling.
Floppy/IDE/SATA Confi guration
Floppy A
Move the cursor to these fi elds via up and down <arrow> keys to select the fl oppy
type. The options are Disabled, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3½", 1.44
MB 3½", and 2.88 MB 3½".
Floppy B
Move the cursor to these fi elds via up and down <arrow> keys to select the fl oppy
type. The options are Disabled, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3½", 1.44
MB 3½", and 2.88 MB 3½".
Onboard Floppy Controller
Use this setting to Enable or Disable the onboard fl oppy controller.
Onboard IDE Controller
There is a single fl oppy controller on the motherboard, which may be Enabled or
Disabled with this setting.
Serial ATA Devices
This setting is used to determine if SATA drives will be used and how many. Op-
tions are Disabled, Device 0, Device 0/1 and Device 0/1/2.
nVidia RAID Function
This setting is used to Enable or Disable the nVidia ROM. If Enabled, the setting
below will appear.
7-5