Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the 1041M-T2+. Installation and
maintenance should be performed by experienced technicians only.
The 1041M-T2+ is a 1U server based on the SC818TQ+-1000LP rackmount chas-
sis and the Super H8QMi-2+, a quad processor serverboard that supports AMD
Opteron 8000 series Socket F type processors and up to 128 GB of registered
ECC DDR2-667/533/400 SDRAM.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the H8QMi-2+ serverboard and
the SC818TQ+-1000LP chassis, which comprise the 1041M-T2+.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the 1041M-T2+ into a rack and
check out the server confi guration prior to powering up the system. If your server
was ordered without processor and memory components, this chapter will refer you
to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Preface
iii
Preface
Advertisement
Table of Contents
