Table of Contents
Advertisement
S
S
UPER
ERVER 8017R-TF+/8017R-7FT+ User's Manual
1-2
Serverboard Features
At the heart of the SuperServer 8017R-TF+/8017R-7FT+ lies the X9QRi-F+/X9QR7-
TF+, a quad processor serverboard based on the Intel C602 chipset. Below are the
main features of the X9QRi-F+/X9QR7-TF+. (See Figure 1-1 for a block diagram
of the chipset).
Processors
The X9QRi-F+/X9QR7-TF+ supports four Intel E5-4600 Series processors in LGA
2011 sockets (Socket R). Please refer to the serverboard description pages on our
web site for a complete listing of supported processors (www.supermicro.com).
Memory
The X9QRi-F+/X9QR7-TF+ has 32 DIMM slots that can support up to 1 TB of ECC
LRDIMM or ECC/non-ECC UDIMM DDR3-1600/1333/1066/800 memory. Modules
of the same size and speed should be used. See Chapter 5 details.
SAS
An LSI 2208 controller is included on the X9QR7-TF+ to provide an eight-port SAS
3.0 subsystem, which is RAID 0, 1, 5, 6, 10, 50 and 60 supported.
SATA
A SATA controller is integrated into the chipset to provide a six-port SATA subsystem,
which is RAID 0, 1, 5 and 10 supported. Two ports support SATA 3.0 while four are
SATA 2.0 ports. The SATA drives are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SATA drives.
Rear I/O Ports
The color-coded I/O ports include one COM port, a VGA (monitor) port, a dedicated
IPMI LAN port and two Gb Ethernet ports. Four USB ports and a UID (Unit Identi-
fi er) button are also located here.
ATI Graphics Controller
The X9QRi-F+/X9QR7-TF+ features an integrated Matrox MGA200 video controller.
1-2
Advertisement
Table of Contents
