Table of Contents
Advertisement
Wake-On-LAN
The Wake-On-LAN header is desig-
nated JWOL. See the table on the
right for pin defi nitions. You must have
a LAN card with a Wake-On-LAN con-
nector and cable to use the Wake-On-
LAN feature.
Wake-On-Ring
The Wake-On-Ring header is des-
ignated JWOR. This function allows
your computer to receive and "wake-
up" by an incoming call to the modem
when in suspend state. See the table
on the right for pin defi nitions. You
must have a Wake-On-Ring card and
cable to use this feature.
SMBus Header
The header at SMBus is for the System
Management Bus. Connect the appro-
priate cable here to utilize SMB on the
system. See the table on the right for
pin defi nitions.
SGPIO
The T-SGPIO1 (Serial General Pur-
pose Input/Output) header provides a
bus between the SATA controller and
the SATA drive backplane to provide
SATA enclosure management func-
tions. Connect the appropriate cables
from the backplane to the T-SGPIO1
header to utilize SATA management
functions on your system.
Chapter 5: Advanced Serverboard Setup
Wake-On-LAN
Pin Defi nitions (JWOL)
Pin#
Defi nition
1
+5V Standby
2
Ground
3
Wake-up
Wake-On-Ring
Pin Defi nitions (JWOR)
Pin#
Defi nition
1
Ground (Black)
2
Wake-up
SMBus Header
Pin Defi nitions (SMBus)
Pin#
Defi nition
1
Data
2
Ground
3
Clock
4
No Connection
SGPIO Header
Pin Defi nitions (T-SGPIO1)
Pin#
Defi nition
1
NC
3
Ground
5
Load
7
NC
Note: NC indicates no connection.
5-15
Pin #
Defi nition
2
NC
4
Data
6
Ground
8
NC
Advertisement
Table of Contents
