Inner Frame; Removing The Inner Frame - Dell Precision 3541 Service Manual

Steps
1. Locate the SSD slot on your computer.
2. Slide the SSD into the slot.
3. Place the SSD thermal plate over the SSD module.
4. Replace the two (M2x3) screws to secure the SSD module to the computer.
Next steps
1. Install the battery.
2. Install the base cover.
3. Follow the procedure in

Inner frame

Removing the inner frame

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
4. Remove the solid state
5. Remove the HDD.
6. Remove the WLAN card.
7. Remove the WWAN card.
About this task
The figure indicates the location of the inner frame and provides a visual representation of the removal procedure.
After working inside your computer.
Before working inside your
drive.
computer.
Disassembly and reassembly 41