About this task
The following image indicates the location of the 4-cell (64 Wh) battery and provides a visual representation of the installation
procedure.
Steps
1. Using the alignment posts, slide and place the 4-cell battery on the palm-rest and keyboard assembly.
2. Align the screw holes on the 4-cell battery with the screw holes on the palm-rest and keyboard assembly.
3. Replace the three (M2x4) screws that secure the 4-cell battery to the palm-rest and keyboard assembly.
4. Connect the battery cable to the connector system board.
Next steps
1. Install the
base
cover.
2. Install the
microSD
card.
3. Install the
SIM
card.
4. Follow the procedure in
Assembly inner frame
Removing the assembly inner frame
Prerequisites
1. Follow the procedure in
2. Remove the
SIM
card.
3. Remove the
microSD
4. Remove the
base
cover.
5. Remove the battery.
6. Remove the
hard
drive.
7. Remove the
WLAN
card.
8. Remove the
WWAN
card.
After working on your
computer.
Before working inside your
card.
computer.
Removing and installing components
41