4. Route the WWAN and WLAN card cable through the retention clips on the frame.
5. Route the Speaker through the retention clips and connect it to the system board.
Next steps
1. Install the
WWAN
card.
2. Install the
WLAN
card.
3. Install the HDD.
4. Install the
solid state
drive.
5. Install the battery.
6. Install the
base
cover.
7. Follow the procedure in
Touchpad buttons
Touchpad buttons
Removing the touchpad buttons
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
solid state
5. Remove the HDD.
6. Remove the
WLAN
card.
7. Remove the
WWAN
card.
8. Remove the
inner
frame.
About this task
The figure indicates the location of the touchpad buttons and provides a visual representation of the removal procedure.
After working inside your
computer.
Before working inside your
drive.
computer.
Disassembly and reassembly
45