Assembly Inner Frame; Removing The Assembly Inner Frame - Dell P137G Service Manual

About this task
The following image indicates the location of the battery cable and provides a visual representation of the installation procedure.
Steps
1. Align and place the battery cable on the battery.
2. Route the battery cable through the routing guides on the battery.
3. Connect the battery cable to the connector on the battery.
Next steps
1. Install the battery.
2. Install the base cover.
3. Install the microSD card.
4. Install the SIM card.
5. Exit Service Mode.
6. Follow the procedure in

Assembly inner frame

Removing the assembly inner frame

Prerequisites
1. Follow the procedure in
2. Remove the SIM card.
3. Remove the microSD
4. Remove the base cover.
5. Remove the battery.
6. Remove the 2280 solid-state drive
7. Remove the WLAN card.
8. Remove the WWAN card.
36 Removing and installing components
After working inside your
Before working inside your
card.
or 2230 solid-state
computer.
computer.
drive.