Appendix C System Specifi Cations - Supero AW-4021A-T2 User Manual

A+ workstation
Table of Contents

Advertisement

Appendix C: System Specifi cations
Appendix C
System Specifi cations
Processors
Single or dual 64-bit AMD Socket F, Opteron 2000 type processors
Note: Please refer to our web site for a complete listing of supported processors.
Chipset
nVidia MCP55 Pro/IO-55 and NEC uPD720400
BIOS
8 Mb AMI® Flash ROM
Memory Capacity
Eight 240-pin DIMM slots that can support up to 64 GB of registered ECC
DDR2-667/533/400 SDRAM
Note: Both interleaved and non-interleaved memory supported. Memory capacity is halved
when using a single processor. See the memory section in Chapter 5 for details.
Serial ATA Controller
nVidia on-chip controller for 6 -port Serial ATA (R AID 0, 1, 0 +1 and 5
supported)
Serial ATA Drive Bays
Six (6) hot-swap drive bays to house six standard 3.5" SATA drives
Peripheral Drive Bays
One (1) 3.5" fl oppy drive
Two (2) 5.25" drive bays
Expansion Slots
Two PCI-Express x16 slots, one PCI-Express x8 slot, one PCI-Express x4 slot,
one 133 MHz PCI-X slot and one 100 MHz PCI-X slot
C-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

4021a-t2

Table of Contents