Table of Contents
Advertisement
IPMI Confi guration
View BMC System Event Log
Pressing the Enter key will open the event log. Use the "+" and "-" keys to navigate
through the system event log.
Clear BMC System Event Log
Selecting this and pressing the Enter key will clear the BMC system event log.
Set LAN Confi guration
Use the "+" and "-"
IP Address
Use the "+" and "-"
IP address in the BMC are shown.
MAC Address
Use the "+" and "-"
rent MAC address in the BMC are shown.
Subnet Address
Use the "+" and "-"
current subnet address in the BMC are shown.
Set PEF Confi guration
PEF Support
Use this setting to Enable or Disable PEF support. If enabled, the following PEF
settings will appear.
PEF Action Global Control
Options are Alert, Power Down, Reset Sysytem, Power Cycle, OEM Action and
Diagnostic Int..
Alert Startup Delay
Use this setting to Enable or Disable the alert startup delay.
Startup Delay
Use this setting to Enable or Disable the startup delay.
Event Message for PEF Action
Use this setting to Enable or Disable event messages for a PEF action.
keys to choose the desired channel number.
keys to select the parameter. The IP address and current
keys to select the parameter. The MAC address and cur-
keys to select the parameter. The subnet address and
7-15
Chapter 7: BIOS
Advertisement
Table of Contents
