Appendix D: System Specifi Cations - Supero SuperWorkstation 7045A-3 User Manual

Supermicro superworkstation 7045a-3: user guide
Table of Contents

Advertisement

Appendix D: System Specifi cations
Appendix D
System Specifi cations
Processors
®
TM
Single or dual 771-pin Intel
Xeon
processors at a front side (system) bus
speed of 1333/1066 MHz. (Please refer to the support section of our web site
for a complete listing of supported processors: (http://www.supermicro.com).
Chipset
Intel 5000X chipset
BIOS
®
8 MB Phoenix
Flash ROM
Memory Capacity
Eight 240-pin DIMM sockets supporting up to 32 GB of FBD (Fully Buffered
DIMM) ECC DDR2-667/533 SDRAM
Note: Interleaved memory - requires memory to be installed two at a time. See the memory section
in Chapter 5 for details.
SAS Controller
Adaptec 9410 controller for 8-port SAS (RAID 0, 1 and 10 supported)
SAS Drive Bays
Eight (8) hot-swap drive bays to house eight (8) SAS drives
Peripheral Drives/Bays
One (1) 3.5" fl oppy drive
Two (2) 5.25" drive bays
Expansion Slots
Six total: one PCI-Express x16 slot, one PCI-Express x4 slot (in a x16 slot),
three 64-bit PCI-X slots (two 133/100 MHz slots and one 100 MHz ZCR slot)
and one 32-bit 33MHz PCI slot
D-1

Advertisement

Table of Contents
loading

Table of Contents