Appendix C System Specifi Cations; Memory Capacity; Sata Controller; Expansion Slots - Supero SuperWorkstation 7046A-HR+ User Manual

Appendix C: System Specifi cations
Appendix C
System Specifi cations
Processors
Single or dual Intel® Xeon® 5500 processors (both CPUs must be of the same
type)
Note: Please refer to our web site for a complete listing of supported processors.
Chipset
Intel 5520/ICH10R chipset
BIOS
32 Mb AMI® SPI Flash ROM

Memory Capacity

Eighteen DIMM sockets supporting up to 144 GB of DDR3-1333/1066/800 registered
ECC SDRAM
Note: Interleaved memory - requires memory must be installed four modules at a time. See Section
5-6 for details.

SATA Controller

Intel on-chip (ICH10R) controller for 6-port 3 Gb/s SATA (RAID 0, 1, 10 and 5
supported)
SATA Drive Bays
Eight hot-swap drive bays to house six (6) standard SATA drives
Peripheral Drive Bays
Three 5.25" drive bays

Expansion Slots

Two PCI Express 2.0 x16 slots, three PCI Express 2.0 x8 slots, one PCI Express
2.0 x8 (in a x16 slot) slot and one PCI Express 2.0 x4 (in a x8 slot) slot
Serverboard
X8DAH+/X8DAH+F (Extended ATX form factor)
Dimensions: 13.68 x 13 in (348 x 330 mm)
C-1