Table of Contents
Advertisement
Wake-On-LAN
The Wake-On-LAN header is desig-
nated JWOL. See the table on the
right for pin defi nitions. You must have
a LAN card with a Wake-On-LAN con-
nector and cable to use the Wake-On-
LAN feature.
(Note: Wake-On-LAN from S3, S4, S5
are supported by LAN1. LAN2 sup-
ports Wake-On-LAN from S1 only.)
Wake-On-Ring
The Wake-On-Ring header is des-
ignated JWOR. This function allows
your computer to receive and "wake-
up" by an incoming call to the modem
when in suspend state. See the table
on the right for pin defi nitions. You
must have a Wake-On-Ring card and
cable to use this feature.
2
Power Supply I
C Header
The JPI
2
C header is for I
be used to monitor the status of the
power supply, fans and system tem-
perature. See the table on the right for
pin defi nitions.
SMBus Header
The header at JSMB is for the System
Management Bus. Connect the appro-
priate cable here to utilize SMB on the
system. See the table on the right for
pin defi nitions.
Chapter 5: Advanced Serverboard Setup
2
C, which may
5-17
Wake-On-LAN
Pin Defi nitions
(JWOL)
Pin#
Defi nition
1
+5V Standby
2
Ground
3
Wake-up
Wake-On-Ring
Pin Defi nitions
(JWOR)
Pin#
Defi nition
1
Ground (Black)
2
Wake-up
2
I
C Header
2
Pin Defi nitions (JPI
C)
Pin#
Defi nition
1
Clock
2
Data
3
PWR Fail
4
Gnd
5
+3.3V
SMBus Header
Pin Defi nitions (JSMB)
Pin#
Defi nition
1
Data
2
Ground
3
Clock
4
No Connection
Advertisement
Table of Contents
