Logs Screens; Log Viewer Screen; Figure 109 Maintenance > Logs > View Log; Table 88 Maintenance > Logs > View Log - ZyXEL Communications P-2304R-P1 Series User Manual

19.2 Logs Screens

19.2.1 Log Viewer Screen

Use this screen to look at log entries and alerts. Alerts are written in red. To access this screen,
click Maintenance > Logs > View Log.
Figure 109 Maintenance > Logs > View Log
Click a column header to sort log entries in descending (later-to-earlier) order. Click again to
sort in ascending order. The small triangle next to a column header indicates how the table is
currently sorted (pointing downward is descending; pointing upward is ascending). Each field
is described in the following table.
Table 88 Maintenance > Logs > View Log
LABEL
Display
Email Log Now
Refresh
Clear Log
#
Time
Message
Source
Destination
Note
P-2304R-P1 Series User's Guide
DESCRIPTION
Select a category whose log entries you want to view. To view all logs, select All
Logs. The list of categories depends on what log categories are selected in the
Log Settings page.
Click this to send the log screen to the e-mail address specified in the Log
Settings page.
Click Refresh to renew the log screen.
Click Clear Log to clear all the log entries, regardless of what is shown on the log
screen.
This field is a sequential value, and it is not associated with a specific log entry.
This field displays the time the log was recorded.
This field displays the reason for the log. See
This field displays the source IP address and the port number of the incoming
packet. In many cases, some or all of this information may not be available.
This field lists the destination IP address and the port number of the incoming
packet. In many cases, some or all of this information may not be available.
This field displays additional information about the log entry.
Chapter 19 Logs
Section 19.3 on page 200.
197