Lan Client List Screen; Figure 43 Network > Lan > Static Dhcp; Table 37 Network > Lan > Static Dhcp - ZyXEL Communications P-2304R-P1 Series User Manual

Chapter 7 LAN
Figure 43 Network > LAN > Static DHCP
Each field is described in the following table.
Table 37 Network > LAN > Static DHCP
LABEL
#
MAC Address
IP Address
Apply
Reset

7.2.4 LAN Client List Screen

This screen is empty if the DHCP server is not enabled. You can enable it in
Network > LAN > DHCP Setup.
Use this screen to look at the IP addresses the ZyXEL Device has assigned to DHCP clients on
the LAN. To access this screen, click Network > LAN > Client List.
92
DESCRIPTION
This field is a sequential value. It is not associated with a specific entry.
Enter the MAC address of the computer to which you want the ZyXEL Device to
assign the same IP address.
Enter the IP address you want the ZyXEL Device to assign to the computer.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
P-2304R-P1 Series User's Guide