Copy Port Attributes - ZyXEL Communications ZyXEL Dimension ES-3148 User Manual

where
<ip|host-name>
[in-band|out-of-
band|vlan <vlan-
id> ]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
This command displays information about the route to an Ethernet device. The following
example displays route information to an Ethernet device with an IP address of
192.168.1.100
sysname> traceroute 192.168.1.100
traceroute to 192.168.1.100, 30 hops max, 40 byte packet
1:192.168.1.100 (10 ms) (10 ms) (0 ms)
traceroute done:
sysname>

35.5 Copy Port Attributes

Use the
copy running-config
ports.
Syntax:
Chapter 35 User and Enable Mode Commands
= The IP address or host name of an Ethernet device.
= Specifies the network interface or the VLAN ID to which the
Ethernet device belongs.
= Specifies the Time To Live (TTL) period.
= Specifies the time period to wait.
= Specifies how many tries the switch performs the traceroute
function.
.
command to copy attributes of one port to another port or
copy running-config interface port-channel <port> <port-list>
copy running-config interface port-channel <port> <port-list>
[active] [name] [speed-duplex] [bpdu-control] [flow-control]
[intrusion-lock] [vlan1q] [vlan1q-member] [bandwidth-limit]
[vlan-stacking] [port-security] [broadcast-storm-control]
[mirroring] [port-access-authenticator] [queuing-method] [igmp-
filtering] [spanning-tree] [mrstp] [protocol-based-vlan] [port-
based-vlan]
ES-3148 User's Guide
267